Details

Product catalog download

58 sealed series

[Terminal secondary-lock mechanism]
The terminal fixed in place by the housing lance construction is further secured by the mechanical stop at the back of the housing to provide doublelocking of terminal.This construction ensures positive clamp of the terminal and virtually eliminates possibilities of terminal disconnection.The construction is so designed that the lance is engaged with the terminal when a mechanical stop is set at the back of the housing.

[Inertia lock mechanism]
Terminal insertion peak value at locking is higher than peak value at terminal full insertion.This means that the connector is inserted to the innermost position by the inertia when terminal passes through the locking point and it is not stopped halfway during insertion.

*In case of purchasing the subject parts, please contact our sales office.
Some part may not be in production.

Tab Size(mm) Applicable wire size Contact resistance Leak current Insulation resistance Seal Materials
2.8
0.3㎣
Initial
3mΩMax.
after durability tests
6mΩMax.
10μAMax. 250MΩMin.
Initial
49.0kPaMin.
after durability tests
29.4kPaMin.
Housing
Nylon, PBT
Terminal
Brass, Phosphor bronze
Wire Seal
Silicone, NBR
Device
2.8
0.3㎣
Initial
3mΩMax.
after durability tests
6mΩMax.
10μAMax. 250MΩMin.
Initial
49.0kPaMin.
after durability tests
29.4kPaMin.
Housing
Nylon, PBT
Terminal
Brass, Phosphor bronze
Wire Seal
Silicone, NBR