58 series

[Terminal secondary-lock mechanism]
The terminal fixed in place by the housing lance
construction is further secured by the mechanical stop
at the back of the housing to provide doublelocking of terminal.
This construction ensures positive clamp of the terminal
and virtually eliminates possibilities of terminal disconnection.
The construction is so designed that the lance is engaged
with the terminal when a mechanical stop is
set at the back of the housing.

[Inertia lock mechanism]
Terminal insertion peak value at locking is higher
than peak value at terminal full insertion.
This means that the connector is
inserted to the innermost position by the inertia
when terminal passes through the locking point
and it is not stopped halfway during insertion.

[Interchangeability identification by colors]
Interchangeability is indicated by colors for easy distinguishing.
Connectors in the same series have different construction
if their colors differ, each other.
There is no interchangeability
among different colored connectors
even with the same number of ways.

*In case of purchasing the subject parts, please contact our sales office.
Some part may not be in production.